Architect Scale · 1:100 on A4 · Landscape

1:100 plan grid - every 10 mm cell equals 1 metre.

Scale Grid A4 · ISO 216 Landscape 10 mm spacing 1:100
Sheet
A4
Standard
ISO 216
Dimensions
297 × 210 mm
Orientation
Landscape
Cell pitch
10 mm
Geometry
1:100

About this template

The most-used scale in European architectural practice, here printed as a ready-to-use grid. Every 10 mm square represents one square metre on site, so a 5 m × 4 m room snaps neatly into a 50 mm × 40 mm patch on the page. Bold every-fifth-line hatching gives you a 5 m reference rhythm. See also: A short reading list on technical drawing standards can help you put any of these grids in their historical and standards-based context.

Best used for

  • Whole-building floor plans
  • Planning-application drawings
  • Site layout at building scale
  • Tender drawings for general contractors

Why A4 in landscape

The international standard sheet for technical drawings (ISO 216). Pairs with ISO 5457 title-block conventions and feeds every desktop laser printer ever built. The landscape orientation gives you 297 mm of horizontal run and 210 mm of vertical, which suits wide subjects - site plans, sequence diagrams, multi-column layouts - where the eye reads left-to-right. Trim and bleed allowances on consumer printers will normally remove a 5 mm strip from each edge; this grid is generated to remain measurable even after that trim, with no critical content placed inside the printer-margin band.

Standards and lineage

Recommended preferred scale per ISO 5455:1979 for building plans. The A4 sheet itself follows ISO 216, and the title-block conventions assumed by this template come from ISO 5457:1999 - the international standard governing how technical drawings are framed, dated, and signed. Background reading: See our scale-and-projection guides for a deeper dive on how all the standards in this lineage interact in practice.

A short history of this grid

1:100 plans came to dominate European practice once the A0–A4 ISO sheet sizes were widely adopted, since most domestic-scale buildings fit cleanly onto an A2 or A3 sheet at this ratio.

Printing notes

For accurate output, print at 100 % scale - never "fit to page", which silently shrinks the sheet by 4–6 % and breaks every measured cell. Use a laser printer if the grid will be traced over with ink, since inkjet inks bleed through technical pen and pencil. If your printer cannot handle the full A4 sheet, scale the SVG to the next-smaller paper size before printing - every GridCraft grid is delivered as vector artwork so it scales cleanly. The downloaded SVG carries the physical sheet dimensions in millimetres, so a compliant print driver should print at 1:1 by default. Our how-to-print guide walks through the calibration test in 30 seconds.

Designer's note

Specialty grids reward the discipline of choosing the right sheet for the right drawing. A Architect Scale · 1:100 on A4 is not a one-size-fits-all sheet - it's a calibrated tool for a specific class of problem. Use it where the page suits the drawing; reach for a different sheet when it doesn't. The catalogue is large precisely so you don't have to compromise on the projection, scale or sheet size.

Related templates