Planometric 30°/90° on Legal · Portrait

About this template

Planometric projection (sometimes called "axonometric plan") rotates the true floor plan by 30° or 45° and erects verticals straight up. The result is a measured 3D pictorial in which every plan dimension is true to scale - beloved of architects because the plan can be drafted normally and the building "extruded" up. See also: A short reading list on technical drawing standards can help you put any of these grids in their historical and standards-based context.

Best used for

• Architectural axonometric drawings of complete buildings
• Urban-design axonometric block studies
• Cutaway interior axonometric drawings
• Theatre set planometric layouts

Why Legal in portrait

8.5×14" - useful when a section needs extra vertical run, or for elevation strips and long timeline diagrams. The portrait orientation gives you 216 mm of horizontal run and 356 mm of vertical, which suits tall subjects - elevations, sections, single-column drawings - where the eye reads top-to-bottom. Trim and bleed allowances on consumer printers will normally remove a 5 mm strip from each edge; this grid is generated to remain measurable even after that trim, with no critical content placed inside the printer-margin band.

Standards and lineage

Planometric projection is a special case of axonometric described in ISO 5456-3:1996. The Legal sheet itself follows US Loose, and the title-block conventions assumed by this template come from ISO 5457:1999 - the international standard governing how technical drawings are framed, dated, and signed. Background reading: See our scale-and-projection guides for a deeper dive on how all the standards in this lineage interact in practice.

A short history of this grid

Planometric drawing was the signature technique of Auguste Choisy in his 1899 "Histoire de l'Architecture", and was later revived by James Stirling and the Cambridge school in the 1960s and 70s.

Printing notes

For accurate output, print at 100 % scale - never "fit to page", which silently shrinks the sheet by 4–6 % and breaks every measured cell. Use a laser printer if the grid will be traced over with ink, since inkjet inks bleed through technical pen and pencil. If your printer cannot handle the full Legal sheet, scale the SVG to the next-smaller paper size before printing - every GridCraft grid is delivered as vector artwork so it scales cleanly. The downloaded SVG carries the physical sheet dimensions in millimetres, so a compliant print driver should print at 1:1 by default. Our how-to-print guide walks through the calibration test in 30 seconds.

Designer's note

Specialty grids reward the discipline of choosing the right sheet for the right drawing. A Planometric 30°/90° on Legal is not a one-size-fits-all sheet - it's a calibrated tool for a specific class of problem. Use it where the page suits the drawing; reach for a different sheet when it doesn't. The catalogue is large precisely so you don't have to compromise on the projection, scale or sheet size.